![]() ![]() Many times we convert to PEX for simplicity and speed but we still sweat on the adapters on either side of the conversion. Example would be the water is not shuf off completely with the main and city shutoffs off and you cannot get the water away from the connection long enough to sweat in cases like these we have resorted to a push fit connection.Īlso, there is another common type of connection, a compression type connection, that utilizes a brass or plastic compression piece to "squish" around the pipe and seal things these are usually very reliable but are only readily available on certain types of valves.įor the main, I would recommend someone properly sweating in some sort of solution even if you need to hire it out. In general, if it is a sweated connection, I would keep it sweated or threaded and only resort to push fit (again, shark bite style) fittings if you have to. ![]() All other locations should be good for a push fit type fitting however I would not personally recommend them else where either if you can avoid them. Also, if you have freezing temperatures at times, ball valves for hose bibs are inherently not frost free.Ī push fit type fitting with rubber gasket (shark bite) for the supply side of the main shut off is generally not a good idea as they are not a very robust connection for something that is always on, does not have an easy means of shutting off (to some people), and is usually hidden. The hose bibs we would not recommend a 1/4 turn ball valve as ball valves are not designed to be used often and should not outlast a globe valve which is typical on hose bibs. However each of those requires a unique solution to replace them per circumstance. This would include sink stops, laundry stop, and main shut off. Yes, we typically are recommending 1/4 turn ball valves for valves that are not used very often. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |